HD SERIES - UV CURABLE FLEXO INKS
SG SERIES - ‘FLEXWRAP' UV CURABLE INKS SHRINK SLEEVES
BB SERIES - UV FLEXO LOW ODOUR INK
PM SERIES - UV CURABLE LOW ODOUR FLEXO INK
UNIVERSAL SLM SERIES - UV LOW MIGRATION FLEXWRAP INKS
HD SERIES - UV CURABLE FLEXO INKS
DESCRIPTION
UV curing ink suitable for printing on paper, unsupported polypropylene, and other synthetic label materials.
PROPERTIES
High colour strength. Fast cure. Good printability. Excellent adhesion properties. Available in Process and Pantone colours
The HD1 ink series can be used for Food Packaging Specifications where the printed layer is a barrier to migration and there is no possibility of set off to the unprinted (food contact) surface. For applications where the material is not a barrier, or set off is possible, we recommend the use of Low Migration inks. Contact us for further details.
It must also be mentioned that the Printer/Converter and Packer/ Filler has legal responsibility to ensure compliance with the relevant legislation for food packaging.
APPLICATION
Mix well before use. Anilox Selection. Solids- 120-180 lines/cm volume 5-10 cm3/m2. Process- 300-500 lines/cm volume 2-4 cm3/m2. Pantone- 160-180 lines/cm volume 5-6 cm3/m2. Minimum lamp power - 160 W/cm. Clean equipment immediately after use (RLA350 UV Wash is recommended).Fully cured HD inks will obtain resistance properties 24 hours after printing.
SUBSTRATES
Suitable for a wide range of coated papers and films, and label stocks such as coated PE, PP, PVC, PET, and OPP. The suitability for uncoated synthetic substrates such as PP should be tested before printing. The surface tension should be 38 dyne/cm or above, and corona treatment can improve the wetting.
STORAGE & HANDLING
Store at temperatures between 100C and 200C.
Shelf life is 12 months from date of manufacture (as seen on the label).
AUXILLARIES
Cleaners:
RLA350 UV Wash, RLA351 Ethyl Acetate, RLA355 Acetone
RLA313 UV Reducer (add up to 5% as required)
RLA301 UV Silicone Slip Additive (add up to 5% as required)
RLA209 UV Photoinitiator (add 1-2% as required)
RLA385 UV Wax Slip Additive (add up to 5% as required)
RLA367 UV Defoamer (Silicone-containing) (add up to 1% maximum)
RLA379 UV Defoamer (Silicone-free) (add up to 1% maximum)
PACKAGING
5kgs buckets
HEALTH & SAFETY
Please refer to relevant MSDS for information on labelling classifications, waste product and container disposal, and personal protection measures.
RANGE
* Denotes full strength. Lightfastness of tints will be reduced.
8 = Excellent
1 = Poor
‡ Denotes resistances to products listed.
+ = very resistant (5)
(-) = needs testing for suitability by customer
- = poor resistance (1)
(on a 1 to 5 scale)
These resistances are tested according to: -
Lightfastness:
ISO 2835-1974
Alcohol Resistance:
ISO 2837-1996
Acid / Grease / Alkali Resistances:
ISO 2836-1999
|
|
Pulse
|
L/Fast
|
Resistances‡
|
|
Shade
|
Code
|
BWS*
|
Alcohol
|
Acid
|
Grease
|
Alkali
|
|
Transparent White
|
HD000
|
N/A
|
+
|
+
|
+
|
+
|
|
Opaque White
|
HD001
|
8
|
+
|
+
|
+
|
+
|
|
High Opacity Op.W.
|
HD002
|
8
|
+
|
+
|
+
|
+
|
|
Yellow
|
HD103
|
4-5
|
+
|
+
|
+
|
+
|
|
Orange
|
HD105
|
4-5
|
+
|
+
|
+
|
+
|
|
Warm Red
|
HD106
|
4-5
|
(-)
|
+
|
(-)
|
+
|
|
Red 032
|
HD107
|
5
|
(-)
|
+
|
(-)
|
+
|
|
Rubine
|
HD108
|
4
|
+
|
(-)
|
|
(-)
|
|
Fast Rhodamine
|
HD139
|
7
|
+
|
+
|
+
|
+
|
|
Purple
|
HD110
|
4
|
(-)
|
|
+
|
|
|
Fast Purple
|
HD140
|
7
|
+
|
+
|
+
|
+
|
|
Fast Violet
|
HD111
|
7
|
+
|
+
|
+
|
+
|
|
072 Blue
|
HD112
|
7
|
+
|
+
|
+
|
+
|
|
Fast Reflex Blue
|
HD113
|
7
|
+
|
+
|
+
|
+
|
|
Reflex Blue
|
HD133
|
3
|
|
+
|
(-)
|
+
|
|
Process Blue
|
HD114
|
7
|
+
|
+
|
+
|
+
|
|
Green
|
HD115
|
7
|
+
|
+
|
+
|
+
|
|
Mixing Black
|
HD116
|
8
|
+
|
+
|
+
|
+
|
|
Dense Black
|
HD117
|
8
|
+
|
+
|
+
|
+
|
|
Process Cyan
|
HD118
|
7
|
+
|
+
|
+
|
+
|
|
Process Magenta
|
HD119
|
4
|
+
|
+
|
|
(-)
|
|
Process Yellow
|
HD120
|
4
|
+
|
+
|
+
|
+
|
|
Process Black
|
HD121
|
8
|
+
|
+
|
+
|
+
|
|
Strong Process Cyan
|
HD122
|
7
|
+
|
+
|
+
|
+
|
|
Strong Process Magenta
|
HD123
|
4
|
+
|
+
|
|
(-)
|
|
Strong Process Yellow
|
HD124
|
4
|
+
|
+
|
+
|
+
|
|
Fast Process Yellow
|
HD030
|
6-7
|
(-)
|
+
|
+
|
+
|
|
Fast Process Magenta
|
HD031
|
6-7
|
+
|
+
|
+
|
+
|
Top
SG SERIES - ‘FLEXWRAP' UV CURABLE INKS SHRINK SLEEVES
DESCRIPTION
UV Curing ink suitable for shrink films
PROPERTIES
Excellent shrink characteristics, more than 70% with good retained adhesion. Steam or hot air shrink. No requirement for primer or protective lacquer. Printing speeds of 150-200 m/min (dependant on lamps). Resistance to chemicals - good, subject to laboratory testing
The SG ink series can be used for Food Packaging Specifications where the printed layer is a barrier to migration and there is no possibility of set off to the unprinted (food contact) surface. For applications where the material is not a barrier, or set off is possible, we recommend the use of Low Migration inks. Contact us for further details.
It must also be mentioned that the Printer/Converter and Packer/ Filler has legal responsibility to ensure compliance with the relevant legislation for food packaging.
APPLICATION
Mix well before use. Anilox Selection. Solids- 120-180 lines/cm. volume 5-10 cm3/m2. Process- 300-500 lines/cm.volume 2-4 cm3/m2. Pantone- 160-180 lines/cm volume 5-6 cm3/m2. Minimum lamp power - 160 W/cm
Clean equipment immediately after use (RLA350 UV Wash is recommended).
Fully cured SG inks will obtain resistance properties 24 hours after printing.
SUBSTRATES
Shrink Films- typically* PVC,PET,PET-G,OPS
* Due to the diverse nature of shrink films it is essential that each grade/ application is tested thoroughly prior to commercial production.
STORAGE & HANDLING
Store at temperatures between 100C and 200C.
Shelf life is 12 months from date of manufacture (as seen on the label).
AUXILLARIES
Cleaners: RLA350 UV Wash, RLA351 Ethyl Acetate, RLA355 Acetone
RLA313 UV Reducer (add upto 5% as required)
RLA336 UV Silicone Slip Additive (add upto 2% as required)
RLA385 UV Wax Slip Additive (add upto 2% as required)
RLA367 UV Defoamer (Silicone-containing) (add upto 1% maximum)
RLA379 UV Defoamer (Silicone-free) (add upto 1% maximum)
PACKAGING 5kgs buckets
HEALTH & SAFETY Please refer to relevant MSDS for information on labelling classifications, waste product and container disposal, and personal protection measures.
RANGE
* Denotes full strength. Lightfastness of tints will be reduced.
8 = Excellent
1 = Poor
‡ Denotes resistances to products listed.
+ = very resistant (5)
(-) = needs testing for suitability by customer
- = poor resistance (1)
(on a 1 to 5 scale)
These resistances are tested according to: -
Lightfastness:
ISO 2835-1974
Alcohol Resistance:
ISO 2837-1996
Acid / Grease / Alkali Resistances:
ISO 2836-1999
Pulse L/Fast Resistances‡
Shade Code BWS* Alcohol Acid Grease Alkali
|
|
Pulse
|
L/Fast
|
Resistances‡
|
|
Shade
|
Code
|
BWS*
|
Alcohol
|
Acid
|
Grease
|
Alkali
|
|
Transparent White
|
SG100
|
N/A
|
+
|
+
|
+
|
+
|
|
Opaque White
|
SG001
|
8
|
+
|
+
|
+
|
+
|
|
High Opacity Op.White
|
SG002
|
8
|
+
|
+
|
+
|
+
|
|
Backing Opaque White
|
SG9004
|
8
|
+
|
+
|
+
|
+
|
|
Yellow
|
SG103
|
4-5
|
+
|
+
|
+
|
+
|
|
Orange
|
SG105
|
4-5
|
+
|
+
|
+
|
+
|
|
Warm Red
|
SG106
|
4-5
|
(-)
|
+
|
(-)
|
+
|
|
Red 032
|
SG107
|
5
|
(-)
|
+
|
(-)
|
+
|
|
Rubine
|
SG108
|
4
|
+
|
(-)
|
|
(-)
|
|
Fast Rhodamine
|
SG139
|
7
|
+
|
+
|
+
|
+
|
|
Purple
|
SG110
|
4
|
(-)
|
|
+
|
|
|
Fast Violet
|
SG111
|
7
|
+
|
+
|
+
|
+
|
|
072 Blue
|
SG112
|
7
|
+
|
+
|
+
|
+
|
|
Fast Reflex Blue
|
SG113
|
7
|
+
|
+
|
+
|
+
|
|
Process Blue
|
SG114
|
7
|
+
|
+
|
+
|
+
|
|
Green
|
SG115
|
7
|
+
|
+
|
+
|
+
|
|
Mixing Black
|
SG116
|
8
|
+
|
+
|
+
|
+
|
|
Dense Black
|
SG117
|
8
|
+
|
+
|
+
|
+
|
|
Process Cyan
|
SG118
|
7
|
+
|
+
|
+
|
+
|
|
Process Magenta
|
SG119
|
4
|
+
|
+
|
|
(-)
|
|
Process Yellow
|
SG120
|
4
|
+
|
+
|
+
|
+
|
|
Process Black
|
SG121
|
8
|
+
|
+
|
+
|
+
|
Top
BB SERIES - UV FLEXO LOW ODOUR INK
DESCRIPTION
Low odour UV curing ink suitable for printing on paper, unsupported polypropylene, and other synthetic label materials. The BB series is Nestle list compliant (06/08/2009).
Pulse Roll Label BB series inks have been formulated to comply with Food Packaging Legislation. Please see:-
Swiss List Eupia Information Note regarding the Swiss list.
EuPIA EuPIA information note on inks for food packaging. The raw materials are selected in accordance with the "Selection scheme for packaging ink raw materials" of the EuPIA Guideline. EuPIA 2
To achieve compliance it will be necessary to carry out a suitable evaluation. Please contact Pulse Roll Label for advice on this evaluation process. It must also be remembered that the manufacturer of the packaging and the filler are responsible for the properties of the food packaging and its compliance with legal requirements. The packaging ink suppliers are not able to issue certificates or declarations of compliance which cover the legal responsibility of others in packaging chain.
PROPERTIES
High colour strength. Fast cure. Good printability. Excellent adhesion properties. Available in Process and Pantone colours
APPLICATION
Mix well before use. Anilox Selection Solids- 120-180 lines/cm volume 5-10 cm3/m2. Process- 300-500 lines/cm volume 2-4 cm3/m2. Pantone- 160-180 lines/cm volume 5-6 cm3/m2 Minimum lamp power - 160 W/cm. Clean equipment immediately after use (RLA350 UV Wash is recommended). To achieve repeatable results for levels of migration it is necessary to print under controlled, repeatable conditions. Keep records of all print variables, batch numbers etc as outlined in the document-Good Manufacturing Practices for the Manufacture of Packaging Inks. GMP Fully cured BB inks will obtain resistance properties 24 hours after printing.
SUBSTRATES
Suitable for a wide range of coated papers and films, and label stocks such as coated PE, PP, PVC, PET, and OPP.
The suitability for uncoated synthetic substrates such as PP should be tested before printing. The surface tension should be 38 dyne/cm or above, and corona treatment can improve the wetting.
STORAGE & HANDLING
Store at temperatures between 100C and 200C.
Shelf life is 12 months from date of manufacture (as seen on the label).
AUXILLARIES
Cleaners: RLA350 UV Wash, RLA351 Ethyl Acetate, RLA355 Acetone
RLA223 UV Reducer (add up to 5% as required)
RLA234 UV Wax Slip Additive (add up to 5% as required)
RLA301 UV Silicone Slip Additive (add up to 5% as required)
RLA367 UV Defoamer (Silicone-containing) (add up to 1% maximum)
RLA379 UV Defoamer (Silicone-free) (add up to 1% maximum)
PACKAGING
5kgs buckets
HEALTH & SAFETY
Please refer to relevant MSDS for information on labelling classifications, waste product and container disposal, and personal protection measures.
RANGE
* Denotes full strength. Lightfastness of tints will be reduced.
8 = Excellent
1 = Poor
‡ Denotes resistances to products listed.
+ = very resistant (5)
(-) = needs testing for suitability by customer
- = poor resistance (1)
(on a 1 to 5 scale)
These resistances are tested according to: -
Lightfastness:
ISO 2835-1974
Alcohol Resistance:
ISO 2837-1996
Acid / Grease / Alkali Resistances:
ISO 2836-1999
|
|
Pulse
|
L/Fast
|
Resistances‡
|
|
Shade
|
Code
|
BWS*
|
Alcohol
|
Acid
|
Grease
|
Alkali
|
|
Transparent White
|
BB100
|
N/A
|
+
|
+
|
+
|
+
|
|
High Opacity Op.W.
|
BB102
|
8
|
+
|
+
|
+
|
+
|
|
Yellow
|
BB103
|
4-5
|
+
|
+
|
+
|
+
|
|
Orange
|
BB105
|
4-5
|
+
|
+
|
+
|
+
|
|
Warm Red
|
BB106
|
4-5
|
(-)
|
+
|
(-)
|
+
|
|
Red 032
|
BB107
|
5
|
(-)
|
+
|
(-)
|
+
|
|
Rubine
|
BB108
|
4
|
+
|
(-)
|
|
(-)
|
|
Fast Rhodamine
|
BB139
|
7
|
+
|
+
|
+
|
+
|
|
Fast Purple
|
BB140
|
7
|
+
|
+
|
+
|
+
|
|
Fast Violet
|
BB111
|
7
|
+
|
+
|
+
|
+
|
|
072 Blue
|
BB112
|
7
|
+
|
+
|
+
|
+
|
|
Fast Reflex Blue
|
BB113
|
7
|
+
|
+
|
+
|
+
|
|
Process Blue
|
BB114
|
7
|
+
|
+
|
+
|
+
|
|
Green
|
BB115
|
7
|
+
|
+
|
+
|
+
|
|
Mixing Black
|
BB116
|
8
|
+
|
+
|
+
|
+
|
|
Process Cyan
|
BB118
|
7
|
+
|
+
|
+
|
+
|
|
Process Magenta
|
BB119
|
4
|
+
|
+
|
|
(-)
|
|
Process Yellow
|
BB120
|
4
|
+
|
+
|
+
|
+
|
|
Process Black
|
BB121
|
8
|
+
|
+
|
+
|
+
|
|
Fast Process Yellow
|
BB130
|
6-7
|
(-)
|
+
|
+
|
+
|
|
Fast Process Magenta
|
BB131
|
6-7
|
+
|
+
|
+
|
+
|
Top
PM SERIES - UV CURABLE LOW ODOUR FLEXO INK
DESCRIPTION
Low odour UV curing ink suitable for printing on paper, unsupported polypropylene, and other synthetic label materials. This PM series contains ‘polymeric' photoinitiators to minimise the potential of migration.
PROPERTIES
High colour strength. Fast cure. Good printability. Excellent adhesion properties. Available in Process and Pantone colours. Compliant with the current Nestle list (Guidance Note on Packaging Inks 01/09/2008)
APPLICATION
Mix well before use. Anilox Selection. Solids- 120-180 lines/cm volume 5-10 cm3/m2. Process- 300-500 lines/cm volume 2-4 cm3/m2. Pantone- 160-180 lines/cm volume 5-6 cm3/m2. Minimum lamp power - 160 W/cm. Clean equipment immediately after use (RLA350 UV Wash is recommended). Fully cured PM inks will obtain resistance properties 24 hours after printing.
SUBSTRATES
Suitable for a wide range of coated papers and films, and label stocks such as coated PE, PP, PVC, PET, and OPP.
The suitability for uncoated synthetic substrates such as PP should be tested before printing. The surface tension should be 38 dyne/cm or above, and corona treatment can improve the wetting.
STORAGE & HANDLING
Store at temperatures between 100C and 200C.Shelf life is 12 months from date of manufacture (as seen on the label).
AUXILLARIES
Cleaners: RLA350 UV Wash, RLA351 Ethyl Acetate, RLA355 Acetone
RLA303 UV Reducer (add up to 5% as required)
RLA301 UV Silicone Slip Additive (add up to 5% as required)
RLA385 UV Wax Slip Additive (add up to 5% as required)
RLA367 UV Defoamer (Silicone-containing) (add up to 1% maximum)
RLA379 UV Defoamer (Silicone-free) (add up to 1% maximum)
PACKAGING
5kgs buckets
HEALTH & SAFETY
Please refer to relevant MSDS for information on labelling classifications, waste product and container disposal, and personal protection measures.
RANGE
* Denotes full strength. Lightfastness of tints will be reduced.
8 = Excellent
1 = Poor
‡ Denotes resistances to products listed.
+ = very resistant (5)
(-) = needs testing for suitability by customer
- = poor resistance (1)
(on a 1 to 5 scale)
These resistances are tested according to: -
Lightfastness:
ISO 2835-1974
Alcohol Resistance:
ISO 2837-1996
Acid / Grease / Alkali Resistances:
ISO 2836-1999
|
|
Pulse
|
L/Fast
|
Resistances‡
|
|
Shade
|
Code
|
BWS*
|
Alcohol
|
Acid
|
Grease
|
Alkali
|
|
Transparent White
|
PM000
|
N/A
|
+
|
+
|
+
|
+
|
|
Opaque White
|
PM001
|
8
|
+
|
+
|
+
|
+
|
|
High Opacity Op.W.
|
PM002
|
8
|
+
|
+
|
+
|
+
|
|
Yellow
|
PM003
|
4-5
|
+
|
+
|
+
|
+
|
|
Orange
|
PM005
|
4-5
|
+
|
+
|
+
|
+
|
|
Warm Red
|
PM006
|
4-5
|
(-)
|
+
|
(-)
|
+
|
|
Red 032
|
PM007
|
5
|
(-)
|
+
|
(-)
|
+
|
|
Rubine
|
PM008
|
4
|
+
|
(-)
|
|
(-)
|
|
Fast Rhodamine
|
PM039
|
7
|
+
|
+
|
+
|
+
|
|
Purple
|
PM010
|
4
|
|
|
|
|
|
Fast Purple
|
PM040
|
7
|
+
|
+
|
+
|
+
|
|
Fast Violet
|
PM011
|
7
|
+
|
+
|
+
|
+
|
|
072 Blue
|
PM012
|
7
|
+
|
+
|
+
|
+
|
|
Fast Reflex Blue
|
PM013
|
7
|
+
|
+
|
+
|
+
|
|
Reflex Blue
|
PM033
|
3
|
|
|
(-)
|
+
|
|
Process Blue
|
PM014
|
7
|
+
|
+
|
+
|
+
|
|
Green
|
PM015
|
7
|
+
|
+
|
+
|
+
|
|
Mixing Black
|
PM016
|
8
|
+
|
+
|
+
|
+
|
|
Dense Black
|
PM017
|
8
|
+
|
+
|
+
|
+
|
|
Process Cyan
|
PM018
|
7
|
+
|
+
|
+
|
+
|
|
Process Magenta
|
PM019
|
4
|
+
|
+
|
|
(-)
|
|
Process Yellow
|
PM020
|
4
|
+
|
+
|
+
|
+
|
|
Process Black
|
PM021
|
8
|
+
|
+
|
+
|
+
|
|
Strong Process Cyan
|
PM022
|
7
|
+
|
+
|
+
|
+
|
|
Strong Process Magenta
|
PM023
|
4
|
+
|
+
|
|
(-)
|
|
Strong Process Yellow
|
PM024
|
4
|
+
|
+
|
+
|
+
|
|
Fast Process Yellow
|
PM030
|
6-7
|
(-)
|
+
|
+
|
+
|
|
Fast Process Magenta
|
PM031
|
6-7
|
+
|
+
|
+
|
+
|
Top
UNIVERSAL SLM SERIES - UV LOW MIGRATION FLEXWRAP INKS
DESCRIPTION
UV Curing ink suitable for shrink films.
PROPERTIES
Excellent shrink characteristics, more than 70% with good retained adhesion. Steam or hot air shrink. No requirement for primer or protective lacquer. Printing speeds of 150-200 m/min (dependant on lamps) Resistance to chemicals - good, subject to laboratory testing.
Pulse Roll Label SLM series inks have been formulated to comply with Food Packaging Legislation. Please see:-
Swiss List Eupia Information Note regarding the Swiss list.
EuPIA EuPIA information note on inks for food packaging. The raw materials are selected in accordance with the "Selection scheme for packaging ink raw materials" of the EuPIA Guideline. EuPIA 2 Regulation (EC) No 1935/2004
To achieve compliance it will be necessary to carry out a suitable evaluation. Please contact Pulse Roll Label for advice on this evaluation process. It must also be remembered that the manufacturer of the packaging and the filler are responsible for the properties of the food packaging and its compliance with legal requirements. The packaging ink suppliers are not able to issue certificates or declarations of compliance which cover the legal responsibility of others in packaging chain.
Note: It is important to note that the EuPIA Guideline recognises that the requirements are challenging and that there will be a need for a Continuous Improvement Strategy to control the potential migrants from packaging inks. It is envisaged that a significant period of time will be required in order to test, and where the required limits are not achieved, to generate an action plan that sets out a programme to ensure compliance within an agreed and manageable timescale.
In short, it is likely that testing will highlight issues that need to be resolved, necessitating a programme of improvement and retesting until compliance is achieved.
APPLICATION
Mix well before use.
Anilox Selection
Solids- 120-180 lines/cm volume 5-10 cm3/m2
Process- 300-500 lines/cm volume 2-4 cm3/m2
Pantone- 160-180 lines/cm volume 5-6 cm3/m2
Minimum lamp power – 160 W/cm
Clean equipment immediately after use (RLA350 UV Wash is recommended).
Fully cured SLM inks will obtain resistance properties 24 hours after printing.
SUBSTRATES
Shrink Films- typically* PVC,PET,PET-G,OPS
* Due to the diverse nature of shrink films it is essential that each grade/ application is tested thoroughly prior to commercial production.
STORAGE & HANDLING
Store at temperatures between 50C and 250C. Shelf life is 12 months from date of manufacture (as seen on the label).
AUXILLARIES
Cleaners: RLA350 UV Wash, RLA351 Ethyl Acetate, RLA355 Acetone
RLA223 UV Reducer (add up to 5% as required)
RLA234 UV Wax Slip Additive (add up to 5% as required)
RLA301 UV Silicone Slip Additive (add up to 5% as required)
RLA367 UV Defoamer (Silicone-containing) (add up to 1% maximum)
RLA379 UV Defoamer (Silicone-free) (add up to 1% maximum)
PACKAGING
5kgs buckets
HEALTH & SAFETY
Please refer to relevant MSDS for information on labelling classifications, waste product and container disposal, and personal protection measures.
|
RANGE
* Denotes full strength. Lightfastness of tints will
be reduced.
8 = Excellent
1 = Poor
; Denotes resistances to products listed.
+ = very resistant (5)
(-) = needs testing for suitability by customer
- = poor resistance (1)
(on
a 1 to 5 scale)
These
resistances are tested according to: -
Lightfastness:
ISO 2835-1974
Alcohol Resistance:
ISO 2837-1996
Acid / Grease / Alkali Resistances:
ISO 2836-1999
|
|
|
Pulse
|
L/Fast
|
Resistances
|
|
Shade
|
Code
|
BWS*
|
Alcohol
|
Acid
|
Grease
|
Alkali
|
|
Transparent
White
|
SLM000
|
N/A
|
+
|
+
|
+
|
+
|
|
High
Opacity Op.White
|
SLM002
|
8
|
+
|
+
|
+
|
+
|
|
Backing
Opaque White
|
SLM9004
|
8
|
+
|
+
|
+
|
+
|
|
Yellow
|
SLM103
|
4-5
|
+
|
+
|
+
|
+
|
|
Orange
|
SLM105
|
4
|
+
|
+
|
+
|
+
|
|
Warm
Red
|
SLM106
|
4-5
|
(-)
|
+
|
(-)
|
(-)
|
|
Red
032
|
SLM107
|
6-7
|
(-)
|
+
|
(-)
|
(-)
|
|
Rubine
|
SLM108
|
5-6
|
(-)
|
(-)
|
+
|
(-)
|
|
Fast
Rhodamine
|
SLM139
|
7
|
+
|
+
|
+
|
+
|
|
Fast
Purple
|
SLM140
|
6-7
|
+
|
+
|
+
|
+
|
|
Fast
Violet
|
SLM111
|
6-7
|
+
|
+
|
+
|
+
|
|
072
Blue
|
SLM112
|
6-7
|
+
|
+
|
+
|
+
|
|
Fast
Reflex Blue
|
SLM113
|
6-7
|
+
|
+
|
+
|
+
|
|
Process
Blue
|
SLM114
|
7
|
+
|
+
|
+
|
+
|
|
Green
|
SLM115
|
7-8
|
+
|
+
|
+
|
+
|
|
Mixing
Black
|
SLM116
|
8
|
+
|
+
|
+
|
+
|
|
Dense
Black
|
SLM8006
|
8
|
+
|
+
|
+
|
+
|
|
Process
Cyan
|
SLM118
|
7
|
+
|
+
|
+
|
+
|
|
Process
Magenta
|
SLM119
|
5-6
|
(-)
|
(-)
|
+
|
(-)
|
|
Process
Yellow
|
SLM120
|
4-5
|
+
|
+
|
+
|
+
|
|
Lightfast
Process Yellow
|
SLM130
|
6-7
|
+
|
+
|
+
|
+
|
|
Lightfast
Proc. Magenta
|
SLM131
|
6-7
|
+
|
+
|
+
|
+
|
|
